| Rub rail (framed float only) per foot - comes in 10' sections
|
$5.50
|
| Rub rail corner insert.
|
$19.00
|
| See instructions for Installing Bump Strip
|
|
|
|
|
| 8" Cleat with stainless hardware
|
$15.00
|
| 10" Cleat with stainless hardware
|
$17.00
|
|
|
|
|
| 2 - 5" Taylor-Made fenders installed
|
$45.00
|
|
|
CONNECTORS
|
|
| Style "S"- used to connect floats side to side or end to end.
Kit includes 2 aluminum arms and 8 heavy-duty stainless set bolts.
|
$30.00
|
|
|
|
Style "T" - used to connect floats into an "L" shape.
"L" shape: one straight & one corner
|
$45.00
|
|
|
|
| Style "TC" used to connect into a "T" shape - or connect one float to another
float - other than at the ends - which are built to receive a connector.
"T" shape (per pair)
|
$90.00
|
|
|
|
| Style "H" connector for connecting 4 or more floats side by side.
|
$45.00
|
|
|
|
| Style "SW" connector Allows for the angling of floats (less than 45 degrees) to
fit the contour of the bow of a boat. Kit includes 2 adjustable angle aluminum
arms and 8 heavy-duty stainless bolts.
|
$60.00
|
|
|
|
| Anchor Chain Bracket - bolts onto framed float
|
$45.00
|
|
|
|
| Roller Bracket - bolts onto framed float
|
$119.00
|
|
|
|
| Transport Wheel Kit Includes attachable rubber wheel & arm for rolling
floats easily to their destination.
|
$75.00
|
|
|
|
| Float Stabilizers (sold in pairs). For use with our framed floats. Our
patented stabilizer with its unique chambers, helps to minimize float
movement - caused by waves, currents, and body movement, by utilizing the
water under the float as ballast.
|
$180.00
|
|
|
STAIRS & LADDERS
|
|
| Four Step Fiberglass Stairs
|
$475.00
|
| Handrail
|
$136.00
|
|
|
|
| AccuDock Folding Ladder for use with framed float
|
$299.00
|
|
|
|
| Aluminum 3/4/5 Step & Aluminum Sliding Ladder - Call for Quote
|
|
|
|
|
|
| Work Float Carrying Tool
|
$11.50
|
|
|
ATTACHMENT & POSITIONING METHODS
|
|
| 3" Spud Pole Bracket (side or end attachment)
|
$45.00
|
|
|
|
| Inside Corner 3" Spud Pole Bracket
|
$129.00
|
|
|
|
Piling Hoops, with and without rollers, and "2 part hoops" that allow
the hoop to be placed around the piling (in cases where the "one piece hoop" cannot
be placed over the top of the piling and slid down into place - and bolted to the dock.
Call with dimensions for price.
|
|
|
|
Positioning Methods- Auger bits, pipes and "T" handles for easily setting & removing pipe pilings.
| Mud Auger
|
$30.00
|
| Auger "T" handle
|
$24.99
|
| 2" schedule 40 pipe with 2 1/2 PVC bushing
|
$12/per foot
|
|
|
|
KAYAK DOCK UPPER BRACKETS
|
|
| Upper Brackets/pair 8" or 12"
|
$99.00
|
|
|
|
| Upper Brackets - extender bracket/pair
|
$149.00
|
| To be used in situations where the water may go over the seawall or dock level.
|
|
|
KAYAK DOCK LOWER BRACKETS
|
|
$299.00
|
|
|
|
| AccuDock "Overhead Assist" Bar
|
$149.00
|
|
| Side assist bar:
|
$129.00
|
|
|
SAFE LAUNCH & ACCESSORIES Safe Launch Page
|
|
SAFE-LAUNCH for 8' slip
SAFE-LAUNCH for 12' slip
|
$699.00
$849.00
|
|
|
|
Accessories package is included in the price of the SAFE-LAUNCH
However (1) cleat with (1) cleat plate can be purchased for $40 each.
|
UNIVERSAL SLIDE ASSEMBLIES
|
|
|
Universal Slide Assembly: Attaches your floating dock to a seawall, Boat lift, or pilings, and allows the dock
to move up and down with the tides. Made of heavy-duty aluminum, and covered with a white PVC finishing cover. Most docks and lifts require only 2 slide brackets.
See slide assembly information and video explaining the use and function of the Slide Assemblies.
Seawall/Piling Slide Assembly (STOCK SIZE)
The Seawall Slide Assembly has flat plates for bolting to the flat surface of a seawall.
|
| Piling side
|
Float side
|
Together with white PVC covering
|
The Seawall Slide Assembly - is the same assembly with flat plates instead of angled for fitting the curvature
of a piling.
Our stock size slides have a 6" extension off the piling/seawall. Seawalls come in all sizes and shapes and
sometimes require 15": - 20" extension off the wall - call for pricing on custom slides.
FOOTER STYLE Slide Assembly
This version is designed for use against a flat seawall which has a footer or very shallow water at the seawall
base - which requires the slide assembly to be angled away from the seawall bottom. (custom slide)
Boat Lift Slide Assembly (stock)
See the AccuDock Floating Dock Slide Assemblies page for more information on
types and styles of slide assemblies.
| Universal Slide Assembly - STOCK
|
$749/pair
|
Custom - call with dimensions for pricing
|
|
|
| Small Version for attaching to floating docks
|
$499/pair
|
