ACCUDOCK RESIDENTIAL FLOATING DOCK

MODULAR FLOATING DOCK

HEAVY DUTY ALUMINUM FLOATING DOCK

SWIM PLATFORMS	FLOATING BOAT DOCK	PWC/DRIVE-ON DOCKS
CREATE A FLOATING DOCK	ALUMINUM GANGWAYS	BUILD YOUR OWN DOCK

ADDITIONAL LINKS TO FLOATING DOCKS:

KAYAK DOCKS JET SKI DOCKS ROWING DOCKS COMMERCIAL MARINAS

RESIDENTIAL WORK FLOATS/FLOATING PLATFORMS COMMERCIAL WORK FLOATS.FLOATING PLATFORMS USED FLOATING DOCKS

ACCUDOCK manufactures modular, portable, and self-installable floating docks, as well as heavy duty all aluminum docks: This page is dedicated to the Accudock lightweight modular floating docks - for information on Accudock Heavy Duty Aluminum Frame Dock - Click Here.

Freeport, Bahamas

Nassau, Bahamas

If you would like to call or email AccuDock to help you design and estimate the cost of your dock - call 954-785-7557 or Contact Us.

DOCK SIZES: The shapes below are also available in 6", 12" and 16" heights, as well as any custom size from 2" - 98 inches in height.

Design your dock using the shapes above on this printable sheet of graph paper: LINK TO PAPER

4' X 15' aluminum ramp fixed in position on land with pipe anchors and rolling on a 44 foot dock positioned with pipe pilings fitted with augers. Southbend, Indiana

LINK TO SAFE LAUNCH PAGE

Lexington, Michigan

Click on the far right picture at the bottom of the linked page for a 360 Degree Virtual Tour of this kayak dock.

Russellville, Arkansas

Manchester, New Hampshire

Manchester, New Hampshire

Tennessee/North Carolina borders

Our new dealer in French Guiana, South America!

For more information on Heavy Duty Aluminum Floating Docks click this Link.

Draw out your design on this printable sheet of graph paper: LINK TO PRINT GRAPH PAPER or call us to help determine the layout and shipping cost of your dock: 954-785-7557.

STEP TWO: DECIDE ON METHOD OF INSTALLATION: - CLICK HERE TO REVIEW METHODS OF INSTALLATION


Are you attaching your floating dock to an existing Fixed Position Dock/seawall, to another Floating Dock, at the Shoreline, or will this dock be a Free Floating Dock? - Click on the link that most resembles your existing method of installation.

HOW WILL YOUR DOCK BE ATTACHED/INSTALLED?

To a fixed dock/seawall

To another floating dock

At the shoreline

Free floating or with a gangway/ramp

CLICK ON THE PICTURE ABOVE THAT MOST RESEMBLES HOW YOUR DOCK WILL BE INSTALLED

ADDITIONAL LINKS TO FLOATING DOCKS:

KAYAK DOCKS JET SKI DOCKS ROWING DOCKS COMMERCIAL MARINAS

RESIDENTIAL WORK FLOATS/FLOATING PLATFORMS COMMERCIAL WORK FLOATS.FLOATING PLATFORMS USED FLOATING DOCKS

GO TO THE INSTALLATIONS OPTION PAGE OR CALL 954-785-7557 TO DISCUSS YOUR DOCK AND METHODS OF INSTALLATION


FLOATING DOCKS FAQ’s (Frequently Asked Questions)

1.   What sizes do they come in?

DOCK SIZES: Our floats are also available in 6", 12" and 16" heights, as well as any custom size from 2" - 98 inches in height.

2.   How much weight do the different sizes hold? See the Specs Section - a 4 X 8 X 8" is rated to 1055 lbs. 4 X 8 X 16" holds over 2000 lbs!

3.   What are they made out of? HDPE (high density polyethylene) - the same material high quality truck bed liners are made of. It is very durable and takes a "beating". Doesn't fade or crack or peel.
Floating docks used in Marinas around the world, whether in northern climates, or in the Caribbean, use floats constructed from polyethylene - it is the product of choice when manufacturing floatation.

4.   What makes it float? There is a block of foam (polystyrene) inside the float - not just air! An entire block of polyethylene is "shoe-horned" into our floats to ensure a very tight fit - which provides added protection in the event of an unfortunate accident - our floats will not sink if punctured! In fact we can put whatever quality of foam inside your floats that your specs require - no one else can do that.
See our cross-section drawing of a typical AccuDock float on the Specs Page.

5.   Are AccuDock Framed Floats portable? Yes. Our largest and heaviest float (5 X 8) only weighs 115 pounds - easily manageable by two persons. When winter comes - the dock is easy to remove. Just disconnect the sections one by one and pull them out and store them in a maximum 5 X 8 space (one atop another as high as you have room).



Put the sections together and slide it into the water. If you have a nearby boat ramp - you can assemble it and float it to your home with a boat.

6.   How do they connect together? We utilize a marine grade aluminum frame system that allows one to easily and rigidly connect the individual floats together end to end (2 - 4 X 8 floats make a 4 X 16), side to side (2 - 4 X 8 floats make an 8 X 8), "L" , "T" or "U" shape - whatever configuration you desire. When our dock is connected together - it is one piece - no rocking or rolling between floats, no marshmallow effect walking on them, no gaps between floats, just a nice clean stable white flat surface that is "no maintenance" to clean - just wash it off.



See full instructions on How to Connect Floats Together

7.   Can I connect and install my own dock? Yes. 75% of our customers, install their own docks! See the How to Install section. Easy to follow instructions regarding installation of all aspects and accessories are detailed there - including our patented Universal Slide Assembly.

8.   Do they come in any other color than white? Yes, we make our docks white, as you could be walking on the white floating dock surface when the temperature is 95 degrees. Any color other than white results in a VERY HOT DOCK! You can deck the dock surface with any type of wood, composite wood, or aluminum to present any style deck you choose - however we suggest using the fully non-maintenance feature of our cool white surface docks. (note: if you order 35 or more sections of dock - you can select whatever color you like including PINK!)

9.   What is the Universal Slide Assembly and why does it make an Accudock dock so stable? It is a patented heavy duty aluminum assembly that is fixed to a piling or seawall, holds your dock firmly and stably like no other product on the market, and allows your dock to float up and down with the tides. The assembly is then covered with a white PVC cosmetic cover.
We have the most stable and secure way to install floating docks - as little as 2 1/2 feet wide, that you can trust the safety of your children on - that in the past would tip immediately. Our Slide Assemblies hold your dock firmly in place and your floating dock rides up and down with the waves and tidal changes - smoothly and evenly.

WATCH THE VIDEOS OF OUR SLIDE ASSEMBLIES IN ACTION:  
 

10.   What if I don't have a piling or seawall, can I use an AccuDock floating dock and will it be stable? There are many ways to rig a floating dock to your property and you can do them all with an AccuDock Float. The larger your dock - the more stability you will have. Go to the Installation Options Page for more information and options.

11.   How do you ship them? We ship factory direct anywhere in the world. All we need is a zip code/postal code and the destination city, and we can provide you a shipping estimate.
Our floats ship by truck - they are too large for UPS and FED-EX, and are delivered by large trucking companies which provide two options: DELIVER TO YOUR HOME, OR DELIVER TO THE NEAREST TRUCK DEPOT (there is an additional fee of $57 (usually) to deliver to your home).
We palletize our larger deliveries on oversized pallets, pad the corners, metal banding with 2 X 4 top bracing, and wrap the whole order in plastic = quality safe shipping.

Accudock.com Floating Docks for and portable floating docks. Our Floating Dock Systems are perfect for all uses, easy to use and store. These Floating Docks are light weight and stackable. Service areas are International and Nationwide. There are no Floating Docks like these on the market. Call today for your Floating Boat Dock 954.785.7557