AccuDock Floating Dock Assembly Extenders Installation

HOW TO INSTALL SLIDE ASSEMBLY FLOAT EXTENDERS

When installing AccuDock floating docks onto pilings, there will be situations whereby the pilings are too far apart - and the float side doesn't reach to the center of both pilings. For example - pilings are 9 feet apart - and you are trying to install an 8' dock to the pilings with our slide assemblies.

AccuDock has an accessory called a "Slide Assembly float extender" for this purpose: It extends the frame out so that the float now spans both pilings. The float extender comes in different lengths.

Float Extender Installation

Measure the distance from center to center on the two pilings that the float will be mounted between. Have this measurement handy when ordering your float extenders.
The float extender is made up of two parts - the extender piece, and the extender holder:
Slide the extender holder into the frame slot, and then slide the extender thru it into the frame:
You may have to remove one of the "jam bolt nuts" from under the frame so that the slide assembly connector base can fit on the frame and not hit the nuts that are welded to the bottom side of the frame. This can be cut off with a hack-saw - it is an aluminum nut.

Float Extender Installation

For assistance or questions call 954-785-7557 ask for tech support.

AccuDock is The Ultimate Floating Dock System! Our Floating Docks are Lightweight, Portable, Durable, and Affordable. Nationwide and International Shipping upon request. Call 954-785-7557 for your Floating Dock System Today.

{ Home | Res. Floating Dock Products | Com. Floating Dock Products | Support | News | Contact }

AccuDock
1336 SW 8th Street
Pompano Beach, Florida 33069
954-785-7557
Info@accudock.com

Click A Flag For Translation